CONUS orders over $99 ship free

NOS EXA GOST 40mm Filter Adapter
NOS EXA GOST 40mm Filter Adapter
NOS EXA GOST 40mm Filter Adapter
NOS EXA GOST 40mm Filter Adapter
NOS EXA GOST 40mm Filter Adapter
NOS EXA GOST 40mm Filter Adapter

Use code MASK-FILTER to get 15% off any filter with purchase of an adapter.

In an effort to bring more functional full face respirators into existence, we've partnered with NOS EXA Group to develop a new gas mask adapter.

These 40mm filter adapters for GOST masks are printed out of hardy, low porosity photo-resin coupled with an O-ring for an reliable airtight seal. This is more than your average hobbyist 3D printed product. Each filter is leak tested and quality controlled.

Why GOST?

Everyone and their mother has some form of Soviet or Eastern Bloc gas mask kicking around, complete with caked on dust, flaking olive paint, and a questionable amount of carcinogens.

However, wearing it without the filter just isn't as cool. So many people just choose to suck it up, and inhale whatever a conscripted Soviet Laborer packed in there 45 years ago. Which is unfortunate, because many of these masks still have a fair bit of utility in them.

With this adapter there is no need to compromise, enabling thousands of masks to be used effectively with modern NATO spec 40mm filters. 

Why masked SLA printing?

For the uninitiated there are two forms of printing, FDM and SLA.
FDM is what most people think of when they think of 3D printing. A strand of material is deposited in layers, much like frosting on a cake. 

SLA is different. UV light cures a photoreactive material in a pool and slowly lifts the shape out. Section by section.

The level of aliasing and detail achieved by SLA exceeds that of FMD. The end result is a smoother, and more structurally dense product This means the part can withstand abuse it will undeniably face. Unlike standard FDM  printed filaments, this photoresin has a low porosity. Making it much more suited for use with respirators.

Installation Manual

Specs

  • Adapter works with most 40mm GOST threaded filter
  • Printed with a Masked Sterolithographic curing process operating at a frequency of 405nm for optimal dimensional accuracy and toughness
  • Utilizes O-ring for airtight seal
  • User serviceable

Replacements, & Returns

If the adapter arrives structurally damaged or defective we will send a replacement free of charge, or issue a full refund. If this is the case, notify support or start your return within seven days of taking delivery.

Health and Safety Reminder

Gas masks are filtration devices.  They are not positive pressure apparatuses and do not produce oxygen.  Such PPE should not be used in the case of gas leaks, chemical spills, or anyplace where simple asphyxiants are in a high concentration.

General liability Statement

The producer of this product accepts no liability in cases where the product has been used inappropriately or not as intended. The selection and use of the product are the exclusive responsibility of the individual operator.

KommandoStore and NOS EXA are not responsible for outcomes stemming from improper use or application of these items.

Learn more about this item and access the users manual through the NOS EXA website.

NOS EXA GOST 40mm Filter Adapter

Rated 5.0 out of 5
Based on 8 reviews
Regular price
$34.99
Sale price
$34.99
Regular price
Sold out
Unit price
per 

Use code MASK-FILTER to get 15% off any filter with purchase of an adapter.

In an effort to bring more functional full face respirators into existence, we've partnered with NOS EXA Group to develop a new gas mask adapter.

These 40mm filter adapters for GOST masks are printed out of hardy, low porosity photo-resin coupled with an O-ring for an reliable airtight seal. This is more than your average hobbyist 3D printed product. Each filter is leak tested and quality controlled.

Why GOST?

Everyone and their mother has some form of Soviet or Eastern Bloc gas mask kicking around, complete with caked on dust, flaking olive paint, and a questionable amount of carcinogens.

However, wearing it without the filter just isn't as cool. So many people just choose to suck it up, and inhale whatever a conscripted Soviet Laborer packed in there 45 years ago. Which is unfortunate, because many of these masks still have a fair bit of utility in them.

With this adapter there is no need to compromise, enabling thousands of masks to be used effectively with modern NATO spec 40mm filters. 

Why masked SLA printing?

For the uninitiated there are two forms of printing, FDM and SLA.
FDM is what most people think of when they think of 3D printing. A strand of material is deposited in layers, much like frosting on a cake. 

SLA is different. UV light cures a photoreactive material in a pool and slowly lifts the shape out. Section by section.

The level of aliasing and detail achieved by SLA exceeds that of FMD. The end result is a smoother, and more structurally dense product This means the part can withstand abuse it will undeniably face. Unlike standard FDM  printed filaments, this photoresin has a low porosity. Making it much more suited for use with respirators.

Installation Manual

Specs

  • Adapter works with most 40mm GOST threaded filter
  • Printed with a Masked Sterolithographic curing process operating at a frequency of 405nm for optimal dimensional accuracy and toughness
  • Utilizes O-ring for airtight seal
  • User serviceable

Replacements, & Returns

If the adapter arrives structurally damaged or defective we will send a replacement free of charge, or issue a full refund. If this is the case, notify support or start your return within seven days of taking delivery.

Health and Safety Reminder

Gas masks are filtration devices.  They are not positive pressure apparatuses and do not produce oxygen.  Such PPE should not be used in the case of gas leaks, chemical spills, or anyplace where simple asphyxiants are in a high concentration.

General liability Statement

The producer of this product accepts no liability in cases where the product has been used inappropriately or not as intended. The selection and use of the product are the exclusive responsibility of the individual operator.

KommandoStore and NOS EXA are not responsible for outcomes stemming from improper use or application of these items.

Learn more about this item and access the users manual through the NOS EXA website.
average rating 5.0 out of 5
Based on 8 reviews
  • 5 Stars
    8 Reviews
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
Customer photos and videos
8 Reviews
Reviewed by Ernest
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

It's green and tough

And it seals well for proper protection when you're actually in the zone using NATO filters.

Loading...
Was this helpful?
Reviewed by Scott W.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Excellent

Now I dont have to worry about possibly breathing in soviet asbestos when exploring old military buildings filled with even more asbestos)

Loading...
Was this helpful?
Reviewed by Dennis L.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Turns gost mask useful

Great product

Loading...
Was this helpful?
Reviewed by John
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

A little rough around the edges but it does the job.

It's a little squeaky when you screw it in, and there's more resistance on both ends than you would get just screwing a filter into a mask, but that's a complete non issue as far as I'm concerned.

As close to a perfect product as you get, does the job perfectly.

Loading...
Was this helpful?
Reviewed by Steven
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

I mean, it works

Looks as pictured and works great with 3 different Russian masks so far. Did some spray tests and wasn’t able to detect the smell. *thumbs up emoji*

Loading...
Was this helpful?