Ejector Straps
• Ejector straps are designed to offer backwards compatibility with FN FAL (R1) magazines and improve the performance of Galil (R4) magazines. In our testing they work well with many magazines which are shorter than the standard 35 round Galil mag, including 30 round STANAG magazines popular on the Armalite Rifle 15 and its derivatives.
• After rigorous internal testing and overwhelming customer feedback we decided to make our ejector straps removeable. This is a small departure from original early-pattern chest rigs however the added utility of removable straps cannot be ignored. So we've switched out permanent stitching in favor of sturdy velcro.
Pouches
• The central magazine pouches hold up to 6 magazines in 3 rows of 2. The cells are made for Galil magazines, but are compatible or partially compatible with STANAG, FAL, G3, AK 47, AK 74, and AK 5.56 magazines.
• The large right pocket is designed to fit a smoke or frag grenade. In practice this pouch works great for small water bottles, miscellaneous loose tools, and extra medical supplies. What you put here really depends on if you are wearing a belt or a fanny pack in addition to the chest rig.
• The two smaller pockets on the left are designed to fit a single fragmentation grenade and a compass respectively. We’ve found they work well for storing weapon lube, cleaning supplies, other smaller items.
• On the inside of the rig, a large admin pouch comfortably accommodates and protects maps, notebooks, and writing utensils.
• A small pen flare pocket is attached to the left side of the central magazine pouches. It’s a great spot for a grease or paint pen.
Proper fit is achieved by adjusting the straps as shown below using the included sliders.
Pay attention to the position of the padded straps, ensuring they sit high on the back of the wearer as shown. This places the padding in the correct position to protect the wearer.
To don the rig, hold the shoulder straps in the crossed position and insert your head and arms as if you were putting on a shirt. Then tighten the straps to fit.
To quickly doff the rig first unbuckle the waist belt. Then “swim out” by grabbing your left shoulder strap with your right hand and pulling it over your head. Repeat this procedure using your left hand to grab the right shoulder strap and pull it over your head. The rig is now completely free from your body.
A common rookie mistake is attempting to remove the rig by reversing the donning procedure. When this rig is loaded the weight of magazines and equipment makes this awkward. With a moment’s practice you’ll find the “swim out” method is much faster.
Important sizing note:
• 1000D PU Coated Cordura fabric
• Milspec ITW Fastex & Slider hardware
• Milspec hook and loop fasteners
• Milspec webbing and binding tape
• High quality bonded nylon thread
• All materials are NIR compliant
Made for high tempo counterinsurgency, the P83 design sits tight, low, and comfortable. Easy to don, easy to doff, and easy to use.
Like early originals, our reproduction 'chest webbing' features ammunition ejector straps. This ensures quick access to many different lengths & Styles of magazines.
Velcro-enclosed pockets & pouches can fit a large variety of equipment and sustainment suitable for any mission
Once you get your rig, you're covered by our comprehensive 30-day return policy.
if you have any questions about the rig's fit, magazine compatibility, or anything else, you can contact customer support with our live chat or by emailing help@kommandostore.com
"What Magazines Are Compatible With My Rig?"
The short version of the answer is that the vast majority of modern box -magazine fed rifle platforms will fit.
Below is a detailed list of everything we've tested and confirmed for fit.
"short" 7.62 magazines and STANAG magazines need the assistance of the ejector strap, ranger plate, or mag assist to compensate for the rig's deep pockets (originally designed for the 35 round R4 (Galil)).
Specifically, Magazines for the 7.62 SCAR, HK G3/HK 91, 7.62 AR 10 PMAGs, 7.62 FAL, and Metallic STANAG Magazines all fit without issue.
longer magazines such as those found on AK platforms work without need of the ejector strap.
Double stack pistol & pistol caliber carbine "Stick" magazines can also be made to fit if you use two placed side-by-side per mag cell.
Specifically, magazines like the 31 round 9mm Glock magazine & its copies, and other 30-round plus magazines for the MP5, B&T GHM9/APC9/MP9, CZ Scorpion, UZI, and many others will all fit.
Prepare the strap by making a closed loop and fastening the strap's Velcro to the inside of the pouch. The loop should be entirely contained by the pouch with room for a magazine to sit inside of it.
Insert a magazine into the loop so that it's cradled by the bottom of the strap and insert it into the pouch. Leave the top of the loop accessible to pull on during extraction. 7.62 mags will likely have a more snug fit.
Extract the magazine by pulling upwards on the strap (you can choose to undo the Velcro and pull the whole strap or simply pull up on the loop). The smoothness of the action will depend on the magazine type.
Our rig is cut and sewn by an experienced manufacturer in Vietnam.
We commissioned custom-run mesh, 1000D Cordura, and ITW Nexus hardware for consistent, top-notch quality.
You're getting a higher quality product than many chinese knock-offs, while matching the original's charm (minus the surplus smell).
Our rig is held to the same standards as modern high-end mil-spec gear is. Special non-reflective fabrics & color absorbing dyes reduces the rig's signature when viewed from night vision devices.
| Performance |
Rated 4 out of 5
|
High Value Chest rig, the shoulder straps are comfy, but the lower strap that goes around your back is way too short for my thicc-boy frame (i'm 6'2" 300lbs). I'll need to get an extension. Holds 3 Ak 7/62x39 mags great, 6 gets a little tight on the over flap, but it holds up for a 2-gun-action-challenge competition. FAL 7.62x51 mags fit Perfect. Side pockets are great for Competition gear like Timers and radios, pens, markers, etc. This is perfect for what I use it for, 2-gun action matches.
| Performance |
Rated 4 out of 5
|
|---|
This rig is going to be great! I have an old pattern 83 and love using it. I bought 2 of these, and due to my unit being deployed, had to have them sent to an APO shipping company to get them to my location. They are going to be for some of the guys in my platoon. We cannot wear them for normal operations, but the guys are looking forward to training on days off with these badass DPM rigs. Thanks Kommandostore, we are all big fans of all that you guys do!!!
| Performance |
Rated 5 out of 5
|
|---|
It's great made very well, became a dpm because of boomerball 2 so I'm going all in I guess
| Performance |
Rated 5 out of 5
|
|---|
Don’t be fat, put down the fork, tie on your boots and get those miles in. Great product would buy again would fit better for me if I wasn’t so fat but that’s not KS fault.
| Performance |
Rated 5 out of 5
|
|---|
This might replace my battle jacket when I go shooting so I don't have my MREs rat fucked by a range bandit.
| Performance |
Rated 5 out of 5
|
|---|
