Pattern 84 Pouch

The adaptability of P84 wherever you have room to attach it.
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch
Pattern 84 Mag Pouch

Pattern 84 Mag Pouch

$44.99 USD
/
Rated 5.0 out of 5
Based on 3 reviews
Pattern
  • M81 Woodland Coming Soon - Sign Up For Back In Stock Notifications!
  • 30 Day Returns
  • Made In The USA
  • NIR Compliant

In 2021, we took it upon ourselves to do a major redesign of the P83 Chest rig to give it the upgrade it deserved, which we then dubbed the "Pattern 84". Since its introduction we've used our rig extensively in order to figure out what design improvements we would like to implement. Most importantly, this iteration focused on customer feedback first. 

While we're far from believing the chest rig is a dying breed, in fact, we think it's more popular than it's ever been. But we just can't ignore the real juggernauts of tactical gear industry. Everyone has a plate carrier. And what better place to use the universal mag pouches from the P84 2.0 Chest rig, than anywhere you want...

Multi-Platform

The P84 Pouch is a heavily reinforced magazine pouch with elastic retention, overbuilt closures, and ample drainage.

Fully compatible with magazines from nearly every semi-automatic rifle in common use — no inserts or addons needed.

Bombproof Construction

Heavy bartacks, reinforced closures, and slick Cordura nylon keep your equipment secure even in the most adverse conditions.

Every hook-and-loop contact area is overbuilt, and all load bearing areas are reinforced with machine sewn bartack stiches. P84 Pouch

Specs

  • 1000D Cordura NIR Compliant Cordura Nylon Construction
  • Heavily reinforced stitching
  • Drainage ports 
  • Accepts an enormous variety of rifle magazines without special inserts or adjustable shock cords. 100% AK, AR-15, AR-10, SCAR compatible
  • Magazine flap angles to reduce snag hazard and improve looks, easy to grab with gloves thanks to flap-tip inserts
Inspired by our re-imagining of South African Pattern 83 chest rigs, the "Eighty Four" Product line brings beloved gear out of obscurity with modern materials & unmatched capability.
See What We've Made So Far

It's All In The Pouches

The Origins of Our Pouch Design & How We Made It More Versatile

Where We Began...

In 1983, the first well-known modern chest rig was made somewhere most people wouldn't expect — South Africa. The SADF's "Pattern 83" brought unparalleled versatility with multiple weapons platforms without the need for modification in the field.

In the age of proprietary inserts & awkward adjustments, we thought we should base a do-it-all design off of something that worked.

All Pattern 84 products are designed with this in mind. long lasting durability, tried-and-true 'flap' retention with the help of modern elastic, and no further purchases necessary to make it fit your favorite mags.

P84 Pouch, Feature-By-Feature

Tap the '+' Symbols Below To Explore

Multi-Platform

P84 Products feature heavily reinforced magazine pouches with elastic retention, overbuilt closures, and ample drainage.

Fully compatible with magazines from nearly every semi-automatic rifle in common use — no inserts or addons needed.

Built-In MOLLE Attachment

Simple nylon with reinforced tabs at the end makes it easy to weave the straps through the laser-cut slots and attach it to anything that has two rows available.

It's ready to attach right out of the box without any clips or straps needed.

Bombproof Construction

Heavy bartacks, reinforced closures, and slick Cordura nylon keep your equipment secure even in the most adverse conditions.

Every hook-and-loop contact area is overbuilt, and all load bearing areas are reinforced with machine sewn bartack stiches. This all ensures P84 products are roll, slide, and drag-proof.

Triple-Stackable Storage

Like the main pockets of the P84 chest rig & mag placard, the P84 pouch can triple-stack aluminum STANAG or lay super-flat when not in use.

It's also perfect for small water bottles, radios, and any extra small equipment you want to have handy.

(Further magazine compatibility notes below)

What Magazines Fit In P84?

If you're using a popular, semi automatic magazine-fed rifle, odds are P84 fits at least 6 of your mags. Want to know for sure? We've tested dozens of different platforms and detailed our results below.

You can help expand this 'verified compatible' list by submitting your results to help@kommandostore.com

In most cases we reccomend the standard 2 magazines per cell for a total of 6 mags. This will work with nearly all metal and polymer 'AR-15 type' mags on the market. However you can chose to 'overload' each mag cell with 3 standard capacity metal STANAGs for a total of 9 magazines.

Note: When overloading, we recommend inserting magazines in a front-to-back order, Not all polymer mags are 'overload' compatible.

AR-Adjacent platforms with similar magazines such as the 30/35 rd. 5.56 Galil, HK93, G36, and others will fit at least 6 mags, but due to the contours of some of the magazines, you might find trouble stacking more than 2 in a pouch.

Longer magazines like the 40 Round Magpul PMAG and the propprietary Steyr AUG 42-Rounders will fit with a total of 6 mags in the rig. If you're crazy and use the Surefire 60-round 'quad stack', we tested that too. each mag cell can fit 1x 60 rounder plus 1 standard capacity STANAG.

Each mag cell holds 2 magazines comfortably. Standard Capacity AKM, AK101, and AK-74 Magazines will fit just fine. Plastic, metal, and Bakelite all work, and P84 2.0 makes it much easier to re-index these mags than 1.0.

We also tested 40rd 7.62 and 45rd 5.45 RPK mags. While they physically fit inside the pouches, 7.62x39 40 rounders can't take advantage of the flap closure. Retention is acceptable thanks to the elastic, but it certainly isn't a "jumpable" configuration.

It's much the same story for 5.45 45 rounders — they fit side by side better than the x39 mags, but still can't take advantage of the flap closure.

P84 accommodates straight walled 20 round .308 mags for the AR-10, MR308, FN FAL, and SCAR-17 without issue. The rig will comfortably fit the standard 2 per cell for a total of 6 mags. For the HK G3, due to the contours of the magazine, we don't recommend double-stacking.

We've tested the much less common SCAR & FAL 30-round magazines, and they also fit without issue, even with baseplates attached.

Magazines such as those found in HK MP5s, B&T GHM/APC/TP Platforms, CZ Scorpions, Grand Power Stribogs, UZIs, Colt AR-9s, and Glock 'stick' type mags will fit, but with a catch: They must be placed side by side in order to maintain retention.

The best way to run PCC magazines for maximum retention is to place 4 in each main mag cell.

Results may vary with magazine extensions and different types of base plates. Compact pistol magazines, such as those used by the Glock 19, may be too short to use effectively in P84's main pouches, but will fit in the multitool pouches if you want to carry them on your rig.

P84 Design Philosophy

The process of modernizing a design like this is a balancing act. Change too little and there’s no benefit to the end user. Change too much and you might ruin what made the original good.


In our view, almost everything about the P83 rig was done right the first time. The philosophy of the SADF is clear, and we agree with their conclusions. We were careful not to reinvent the wheel with P84 — instead we focused on improving what was already there, and putting our customers first when considering any changes.

Armor Accomodation

The explosion in popularity of plate carriers and tactical belts for the everyman in recent decades has had an enormous impact on all gear — but we didn't think yet another plate carrier system or two-layer belt on the market was necessary for us to make.

The P84 pouch is made to become your go-to for your existing plate carrier or tactical belt without specializing itself into a corner.

Materials Matter

All P84 Products cut no corners on hard-wearing materials.

The NIR compliant CORDURA Nylon fabric we use is renowned for it's high abrasion resistance & tensile strength. Velcro flaps & attachment ensure security of all your equipment in the most extreme conditions.

Superior Versatility

P84 strives to be anything but 'single purpose'. The pouch exists to be mounted wherever there's two molle loops or a space on your belt that needs more storage and adapt to whatever you might need it to hold.

Platform Compatibility

P84's specially designed magazine cells accommodate almost all semi-auto rifle mags. No inserts or extra gimmicks needed.

We've certified many different types of magazines, but the sky is the limit — in a pinch, even pistol caliber carbine mags fit.

Back to Top of Page
Write a Review
average rating 5.0 out of 5
Based on 3 reviews
  • 5 Stars
    3 Reviews
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
Build Quality
Rated 5 out of 5
Customer photos and videos
Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal
3 Reviews
Reviewed by Chandler W.
Verified Buyer
I recommend this product
Height
5'11"
Weight
190-210
What Platform Do You Use With This Rig?
  • AR-15/STANAG-Compatible
  • SCAR/AR10
  • Handguns/Pistol Caliber Carbine
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Solid pouch

Does it's job and does it well. With how flat it sits the main purpose for it is for magazines, which like advertised will fit 3 mags of 5.56 stanag and Magpul pmags orb2 308 sr25 or pmags with ranger plates. For a joke I shoved 6 20 round vp9 mags in as well.

Took on a hunting trip and didn't have any issues with ammo storage.

The fact it comes in my favorite camo is just a bonus

Loading...
Build Quality
Rated 5 out of 5
Image by Chandler W. View more (2)
Was this helpful?
Reviewed by William C.
Verified Buyer
I recommend this product
Height
6'1"
Weight
210-240
What Platform Do You Use With This Rig?
  • Other
Rated 5 out of 5
Review posted

Works great

Works perfectly, gonna buy another one for my rig

Loading...
Build Quality
Rated 5 out of 5
Was this helpful?
Reviewed by Dane
Verified Buyer
I recommend this product
Height
6'1"
Weight
210-240
What Platform Do You Use With This Rig?
  • AR-15/STANAG-Compatible
  • AK47/74
  • FAL
  • G3
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Operation Metro/Locker ain't ready

Great pouch and great quality thanks boys

Loading...
Build Quality
Rated 5 out of 5
Was this helpful?
Reviewed by Noah C.
Verified Buyer
I recommend this product
Height
5'11"
Weight
175-190
What Platform Do You Use With This Rig?
  • AR-15/STANAG-Compatible
  • AK47/74
  • Handguns/Pistol Caliber Carbine
Have you used a P84 product before?
Yes
Rated 5 out of 5
Review posted

Quality Multi-Caliber Pouch

Originally bought this to run on a plate carrier but decided to try it on my belt for funsies. Easily holds one or two Pmags of either 30 or 40 round variety as well as various types of AK mags. The commercial Bulgarian poly mags fit fine, Circle 10s are a bit more snug, and Xtech Mag47s are when things start getting a bit too tight. Also does a fairly good job of holding Sig P320 21 round and 30 round mags for all the Flux Raider Shadow Legends out there. Retention is solid when double stacked and single stack is also decent, even with two 320 mags. I originally had a First Spear Multimag pouch on my belt, but being able to swap calibers without adjusting the pouch or changing inserts is fantastic and makes this a very good plug and play option for multi-cal larpers.

Loading...
Build Quality
Rated 5 out of 5
Image by Noah C. View more (5)
Was this helpful?

Recently viewed

Back to Packs & Load Bearing Equipment