Pattern 84 Placard

The Jack-Of-All-Trades Placard For Virtually Any Plate Carrier.
▶️ Take An In-Depth Look
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard
Pattern 84 Mag Placard

Pattern 84 Mag Placard

$119.99 USD
/
Rated 5.0 out of 5
Based on 16 reviews
Pattern
  • M81 Woodland Coming Soon - Sign Up For Back In Stock Notifications!
  • 30 Day Returns
  • Made In The USA
  • NIR Compliant

In 2021, we took it upon ourselves to do a major redesign of the P83 Chest rig to give it the upgrade it deserved, which we then dubbed the "Pattern 84". Since its introduction we've used our rig extensively in order to figure out what design improvements we would like to implement. Most importantly, this iteration focused on customer feedback first. 

While we're far from believing the chest rig is a dying breed, in fact, we think it's more popular than it's ever been. But we just can't ignore the real juggernauts of tactical gear industry. Everyone has a plate carrier. And what better place to use the universal mag pouches from the P84 2.0 Chest rig...

Multi-Platform

The P84 Placard features heavily reinforced magazine pouches with elastic retention, overbuilt closures, and ample drainage.

Fully compatible with magazines from nearly every semi-automatic rifle in common use — no inserts or addons needed.

Both sides of the Placard feature small utility pouches, perfect for multitools, compact folding knives, and double-stack 9mm pistol mags.

Bombproof Construction

Heavy bartacks, reinforced closures, and slick Cordura nylon keep your equipment secure even in the most adverse conditions.

Every hook-and-loop contact area is overbuilt, and all load bearing areas are reinforced with machine sewn bartack stiches. P84 Placard is roll, slide, and drag-proof. 

Mission Configurable

The placard is swift clip compatible (and somewhat Crye compatible as well) using its adjustable height buckles and Velcro one wrap straps.

The rig is also fully 'dangler' compatible thanks to a hook and loop pocket underneath the magazine cells.

Specs

  • 1000D Cordura NIR Compliant Cordura Nylon Construction
  • Heavily reinforced stitching
  • Drainage ports in all pouches 
  • "Dangler" Pouch Compatible
  • Accepts an enormous variety of rifle magazines without special inserts or adjustable shock cords. 100% AK, AR-15, AR-10, SCAR compatible
  • Magazine flap angles to reduce snag hazard and improve looks, easy to grab with gloves thanks to flap-tip inserts
Inspired by our re-imagining of South African Pattern 83 chest rigs, the "Eighty Four" Product line brings beloved gear out of obscurity with modern materials & unmatched capability.
See What We've Made So Far

It's All In The Pouches

The Origins of Our Pouch Design & How We Made It More Versatile

Where We Began...

In 1983, the first well-known modern chest rig was made somewhere most people wouldn't expect — South Africa. The SADF's "Pattern 83" brought unparalleled versatility with multiple weapons platforms without the need for modification in the field.

In the age of proprietary inserts & awkward adjustments, we thought we should base a do-it-all design off of something that worked.

All Pattern 84 products are designed with this in mind. long lasting durability, tried-and-true 'flap' retention with the help of modern elastic, and no further purchases necessary to make it fit your favorite mags.

P84 Placard, Feature-By-Feature

Tap the '+' Symbols Below To Explore

Multi-Platform

P84 Products feature heavily reinforced magazine pouches with elastic retention, overbuilt closures, and ample drainage.

Fully compatible with magazines from nearly every semi-automatic rifle in common use — no inserts or addons needed.

Adjustable Ride Height

Not every plate carrier features the same type of attachment system, but the P84 placard doesn't care.

'Ride Height' of the entire placard can be raised or lowered with ease to suit your needs and can even be used without the buckles in a pinch.

Want To Go 'Micro'?

The placard comes complete and ready to mount on your favorite carrier out of the box, featuring full compatibility with 'dangler' pouches.

But if you want to convert it into a 'micro' standalone chest rig, 4 attachment loops on the edges can be used to attach your favorite shoulder harness & backstrap.

Bombproof Construction

Heavy bartacks, reinforced closures, and slick Cordura nylon keep your equipment secure even in the most adverse conditions.

Every hook-and-loop contact area is overbuilt, and all load bearing areas are reinforced with machine sewn bartack stiches. This all ensures P84 is roll, slide, and drag-proof.

Room For More

Both sides of the placard feature small utility pouches, perfect for multitools, compact folding knives, and double-stack 9mm pistol mags.

Each utility pouch features it's own Velcro-secured flap for extra security.

What Magazines Fit In P84?

If you're using a popular, semi automatic magazine-fed rifle, odds are P84 fits at least 6 of your mags. Want to know for sure? We've tested dozens of different platforms and detailed our results below.

You can help expand this 'verified compatible' list by submitting your results to help@kommandostore.com

In most cases we reccomend the standard 2 magazines per cell for a total of 6 mags. This will work with nearly all metal and polymer 'AR-15 type' mags on the market. However you can chose to 'overload' each mag cell with 3 standard capacity metal STANAGs for a total of 9 magazines.

Note: When overloading, we recommend inserting magazines in a front-to-back order, Not all polymer mags are 'overload' compatible.

AR-Adjacent platforms with similar magazines such as the 30/35 rd. 5.56 Galil, HK93, G36, and others will fit at least 6 mags, but due to the contours of some of the magazines, you might find trouble stacking more than 2 in a pouch.

Longer magazines like the 40 Round Magpul PMAG might have a little trouble fitting in the placard. If you're crazy and use the Surefire 60-round 'quad stack', we tested that too and it fits snugly. each mag cell can fit 1x 60 rounder plus 1 standard capacity STANAG.

Each mag cell holds 2 magazines comfortably. Standard Capacity AKM, AK101, and AK-74 Magazines will fit just fine. Plastic, metal, and Bakelite all work, and P84 2.0 makes it much easier to re-index these mags than 1.0.

We also tested 40rd 7.62 and 45rd 5.45 RPK mags. While they physically fit inside the pouches, 7.62x39 40 rounders can't take advantage of the flap closure. Retention is acceptable thanks to the elastic, but it certainly isn't a "jumpable" configuration.

It's much the same story for 5.45 45 rounders — they fit side by side better than the x39 mags, but still can't take advantage of the flap closure.

P84 accommodates straight walled 20 round .308 mags for the AR-10, MR308, FN FAL, and SCAR-17 without issue. The rig will comfortably fit the standard 2 per cell for a total of 6 mags. For the HK G3, due to the contours of the magazine, we don't recommend double-stacking.

We've tested the much less common SCAR & FAL 30-round magazines, and they also fit without issue, even with baseplates attached.

Magazines such as those found in HK MP5s, B&T GHM/APC/TP Platforms, CZ Scorpions, Grand Power Stribogs, UZIs, Colt AR-9s, and Glock 'stick' type mags will fit, but with a catch: They must be placed side by side in order to maintain retention.

The best way to run PCC magazines for maximum retention is to place 4 in each main mag cell.

Results may vary with magazine extensions and different types of base plates. Compact pistol magazines, such as those used by the Glock 19, may be too short to use effectively in P84's main pouches, but will fit in the multitool pouches if you want to carry them on your rig.

P84 Design Philosophy

The process of modernizing a design like this is a balancing act. Change too little and there’s no benefit to the end user. Change too much and you might ruin what made the original good.


In our view, almost everything about the P83 rig was done right the first time. The philosophy of the SADF is clear, and we agree with their conclusions. We were careful not to reinvent the wheel with P84 — instead we focused on improving what was already there, and putting our customers first when considering any changes.

Armor Accomodation

The explosion in popularity of plate carriers for the everyman in recent decades has had an enormous impact on all tactical gear — but we didn't think yet another plate carrier system on the market was necessary for us to make just yet.

The P84 placard is made to become your go-to for your existing plate carrier without specializing itself into a corner.

Superior Versatility

Configurations for demonstration only. Shoulder straps, back strap, & plate carrier not included.

P84 strives to be anything but 'single purpose'. The placard has the ability to be turned into a 'micro rig' on demand and accept 'dangler' & 'wing' attachments.

It's a blank canvas for you to fit into your existing gear arsenal, or start fresh with something simple & adaptable.

Platform Compatibility

Like the original, P84's specially designed magazine cells accommodate almost all semi-auto rifle mags. No inserts or extra gimmicks needed.

We've certified many different types of magazines, but the sky is the limit — in a pinch, even pistol caliber carbine mags fit.

Materials Matter

All P84 Products cut no corners on hard-wearing materials.

The NIR compliant CORDURA Nylon fabric we use is renowned for it's high abrasion resistance & tensile strength. Velcro flaps & attachment ensure security of all your equipment in the most extreme conditions.

Back to Top of Page
Write a Review
average rating 5.0 out of 5
Based on 16 reviews
  • 5 Stars
    16 Reviews
  • 4 Stars
    0 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
Build Quality
Rated 5 out of 5
Customer photos and videos
Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal
16 Reviews
Reviewed by Graham M.
Verified Buyer
I recommend this product
Height
6'
Weight
175-190
What Platform Do You Use With This Rig?
  • AR-15/STANAG-Compatible
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Beautiful

Gets the job done, looks great, and supports a business to hopefully make more HEAT rigs... they are still out of stock

Loading...
Build Quality
Rated 5 out of 5
Was this helpful?
Reviewed by Leo
I recommend this product
Height
5'7"
Weight
125-140
What Platform Do You Use With This Rig?
  • AK47/74
  • AR-15/STANAG-Compatible
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Additional buckles for the installing?

The placard is amazing fits all mags I need and extremely durable. However does it come with extra buckles that are plate carrier itself, meaning the ones that hold those that attach. Or do we need to buy those separately?

Loading...
Build Quality
Rated 5 out of 5
Was this helpful?
Reviewed by Ian C.
Verified Buyer
I recommend this product
Height
5'10"
Weight
175-190
What Platform Do You Use With This Rig?
  • AK47/74
Have you used a P84 product before?
Yes
Rated 5 out of 5
Review posted

Peak

This shit is gas. I live it it works awesome for my Ak74 mags

Loading...
Build Quality
Rated 5 out of 5
Was this helpful?
Reviewed by Alexander V.
Verified Buyer
I recommend this product
Height
5'11"
Weight
160-175
What Platform Do You Use With This Rig?
  • AR-15/STANAG-Compatible
  • SCAR/AR10
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Great do it all placard

Fits different mags without having to use different pouches! Works great with just 3 AR mags but can easily go up to 9 mag. Also side pouches fit pistol mags or multitools well.

Loading...
Build Quality
Rated 5 out of 5
Image by Alexander V.
Was this helpful?
Reviewed by Alex H.
Verified Buyer
I recommend this product
Height
5'6"
Weight
160-175
What Platform Do You Use With This Rig?
  • AR-15/STANAG-Compatible
  • AK47/74
  • FAL
  • Handguns/Pistol Caliber Carbine
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Fits almost every common magazine

Added capability to be able to fit both AK and AR magazines with switching flaps. Integrates well with the crye flap pocket on my AVS.

Loading...
Build Quality
Rated 5 out of 5
Image by Alex H. View more (6)
Was this helpful?

Recently viewed