Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]
Pattern 84 Mag Placard [Berry Compliant]

Pattern 84 Mag Placard [Berry Compliant]

Color
Color: Ranger Green
Out of stock

30 Day Returns

Made in the USA

NIR Compliant

Product Details, Specs, & Guides

In 2021, we took it upon ourselves to do a major redesign of the P83 Chest rig to give it the upgrade it deserved, which we then dubbed the "Pattern 84". Since its introduction we've used our rig extensively in order to figure out what design improvements we would like to implement. Most importantly, this iteration focused on customer feedback first. 

While we're far from believing the chest rig is a dying breed, in fact, we think it's more popular than it's ever been. But we just can't ignore the real juggernauts of tactical gear industry. Everyone has a plate carrier. And what better place to use the universal mag pouches from the P84 2.0 Chest rig...

Multi-Platform

The P84 Placard features heavily reinforced magazine pouches with elastic retention, overbuilt closures, and ample drainage.

Fully compatible with magazines from nearly every semi-automatic rifle in common use — no inserts or addons needed.

Both sides of the Placard feature small utility pouches, perfect for multitools, compact folding knives, and double-stack 9mm pistol mags.

Bombproof Construction

Heavy bartacks, reinforced closures, and slick Cordura nylon keep your equipment secure even in the most adverse conditions.

Every hook-and-loop contact area is overbuilt, and all load bearing areas are reinforced with machine sewn bartack stiches. P84 Placard is roll, slide, and drag-proof. 

Mission Configurable

The placard is swift clip compatible (and somewhat Crye compatible as well) using its adjustable height buckles and Velcro one wrap straps.

The rig is also fully 'dangler' compatible thanks to a hook and loop pocket underneath the magazine cells.

Specs

  • 1000D Cordura NIR Compliant Cordura Nylon Construction
  • Heavily reinforced stitching
  • Drainage ports in all pouches 
  • "Dangler" Pouch Compatible
  • Accepts an enormous variety of rifle magazines without special inserts or adjustable shock cords. 100% AK, AR-15, AR-10, SCAR compatible
  • Magazine flap angles to reduce snag hazard and improve looks, easy to grab with gloves thanks to flap-tip inserts

Where We Began...

In 1983, the first well-known modern chest rig was made somewhere most people wouldn't expect — South Africa. The SADF's "Pattern 83" brought unparalleled versatility with multiple weapons platforms without the need for modification in the field.

In the age of proprietary inserts & awkward adjustments, we thought we should base a do-it-all design off of something that worked.

All Pattern 84 products are designed with this in mind. long lasting durability, tried-and-true 'flap' retention with the help of modern elastic, and no further purchases necessary to make it fit your favorite mags.

P84 Placard, Feature-By-Feature

Click or tap the icons below to explore

Mag Compatibability Guide

If you're using a popular, semi automatic magazine-fed rifle, odds are P84 fits at least 6 of your mags. Want to know for sure? We've tested dozens of different platforms and detailed our results below.

You can help expand this 'verified compatible' list by submitting your results to help@kommandostore.com

AR-15 & Other .223/5.56 Platforms

In most cases we reccomend the standard 2 magazines per cell for a total of 6 mags. This will work with nearly all metal and polymer 'AR-15 type' mags on the market. However you can chose to 'overload' each mag cell with 3 standard capacity metal STANAGs for a total of 9 magazines.

Note: When overloading, we recommend inserting magazines in a front-to-back order, Not all polymer mags are 'overload' compatible.

AR-Adjacent platforms with similar magazines such as the 30/35 rd. 5.56 Galil, HK93, G36, and others will fit at least 6 mags, but due to the contours of some of the magazines, you might find trouble stacking more than 2 in a pouch.

Longer magazines like the 40 Round Magpul PMAG and the proprietary Steyr AUG 42-Rounders will fit with a total of 6 mags in the rig. If you're crazy and use the Surefire 60-round 'quad stack', we tested that too. each mag cell can fit 1x 60 rounder plus 1 standard capacity STANAG.

Kalashnikov Platforms & Similar

Each mag cell holds 2 magazines comfortably. Standard Capacity AKM, AK101, and AK-74 Magazines will fit just fine. Plastic, metal, and Bakelite all work, and P84 2.0 makes it much easier to re-index these mags than the previous version of this rig.

We also tested 40rd 7.62 and 45rd 5.45 RPK mags. While they physically fit inside the pouches, 7.62x39 40 rounders can't take advantage of the flap closure. Retention is acceptable thanks to the elastic, but it certainly isn't a "jumpable" configuration.

It's much the same story for 5.45 45 rounders — they fit side by side better than the x39 mags, but still can't take advantage of the flap closure.

7.62 NATO/.308/6.5c "Battle Rifles" & DMRs

P84 accommodates straight walled 20 round .308 mags for the AR-10, MR308, FN FAL, and SCAR-17 without issue. The rig will comfortably fit the standard 2 per cell for a total of 6 mags. For the HK G3, due to the contours of the magazine, we don't recommend double-stacking.

We've tested the much less common SCAR & FAL 30-round magazines, and they also fit without issue, even with baseplates attached.

Pistol Caliber Carbines/SMGs

Magazines such as those found in HK MP5s, B&T GHM/APC/TP Platforms, CZ Scorpions, Grand Power Stribogs, UZIs, Colt AR-9s, and Glock 'stick' type mags will fit, but with a catch: They must be placed side by side in order to maintain retention.

The best way to run PCC magazines for maximum retention is to place 4 in each main mag cell.

Results may vary with magazine extensions and different types of base plates. Compact pistol magazines, such as those used by the Glock 19, may be too short to use effectively in P84's main pouches, but will fit in the multitool pouches if you want to carry them on your rig.

Load video:

Get The Full Breakdown.

Watch our YouTube video to get to know your placard

Head To Our Channel

If It Ain't Broke..?

The process of modernizing a design like this is a balancing act. Change too little and there’s no benefit to the end user. Change too much and you might ruin what made the original good.


In our view, almost everything about the P83 rig was done right the first time. The philosophy of the SADF is clear, and we agree with their conclusions. We were careful not to reinvent the wheel with P84 — instead we focused on improving what was already there, and putting our customers first when considering any changes.

Click the "+" icons for more information

Superior Versatility

Armor Accomodation

Compatibility

Materials Matter

A New Life For Classic Gear.

Modern materials, unmatched capability. Browse our product line that takes beloved gear of the past and brings it into the future.

One Step Further
Write a Review
average rating 4.9 out of 5
Based on 71 reviews
  • 5 Stars
    66 Reviews
  • 4 Stars
    5 Reviews
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
Build Quality
Rated 5 out of 5
Customer photos and videos
Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal Open user-uploaded photo and review in a modal
71 Reviews
Reviewed by Aiden C.
Verified Buyer
I recommend this product
Height
6'2"
Weight
175-190
What Platform Do You Use With This Rig?
  • AK47/74
  • SCAR/AR10
  • AR-15/STANAG-Compatible
  • Handguns/Pistol Caliber Carbine
Have you used a P84 product before?
Yes
Rated 5 out of 5
Review posted

If you’re looking for the placard to run 6+1 AK mags, this is it.

I absolutely love this thing, I can easily carry 6 - 7.62x39 AK mags with no major issues, the only issue I have ran into is that it tends to be a tight fit with the US-Palm mags. That being said Magpul and steelies fit great.

Now, if you’re going for a highspeed cool guy pouch this probably isn’t gonna do you any favors because it’s designed for 6 mags, right? WRONG!!! Due to it’s awesome elastic band you can comfortably run A single AR mag or 6 - MP7 mags in one pouch with the same secure fit.

It also has an adjustable placard, so for someone who is running AK mags like me, it allows me to have a lower hanging placard which lets me access my upper admin pouch or phone holder. And when I’m running my AR? I just cinch it back up with no issues.

I run a shellback rampage 2.0 and had 0 issues.

Now we have to hope and pray they release the Pattern 84 placard in the new MWII Red camo they are working on. Very cool Kommano Store!

Loading...
Build Quality
Rated 5 out of 5
Image by Aiden C. View more (2)
Was this helpful?
Reviewed by Sean P.
Verified Buyer
I recommend this product
Height
5'11"
Weight
160-175
What Platform Do You Use With This Rig?
  • AR-15/STANAG-Compatible
  • AK47/74
  • Handguns/Pistol Caliber Carbine
  • FAL
  • Other
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Good rig

Combined with straps, becomes a slick pat 84 chest rig. You can fit 6 Pmags, 6 AK mags if you really push it. And you can fit dual stack pistol mags in the side pouches. I like this design since you can run almost any magazines without changing the placcard. You can run it on a harness or slap it onto your Plate carrier. Very versatile. Materials feel very durable.

Loading...
Build Quality
Rated 5 out of 5
Image by Sean P.
Was this helpful?
Reviewed by LEANDER C.
Verified Buyer
I recommend this product
Height
5'8"
Weight
175-190
What Platform Do You Use With This Rig?
  • Other
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Bombproof Placard!

I used this placard, plus 2 P84 mag pouches, to build a recce rig with a Ferro Concepts Chesty rig wide V2. 10 mags of 7.62 when fully stuffed. Solid materials. Love that I can swap this between my different harnesses/PCs.

Loading...
Build Quality
Rated 5 out of 5
Was this helpful?
Reviewed by Connor K.
Verified Buyer
I recommend this product
Height
5'7"
Weight
175-190
Have you used a P84 product before?
Yes
Rated 5 out of 5
Review posted

P84 Placard

Compact and fits alot, looks great too.

Loading...
Build Quality
Rated 5 out of 5
Was this helpful?
Reviewed by Jacob R.
Verified Buyer
I recommend this product
Height
>6'4
Weight
210-240
What Platform Do You Use With This Rig?
  • AR-15/STANAG-Compatible
  • AK47/74
  • G3
  • Handguns/Pistol Caliber Carbine
  • Other
Have you used a P84 product before?
No
Rated 5 out of 5
Review posted

Works

It retains every kind of magazine I threw at it. In my case the velcro on the back doesn't adhere very well, but seems to be more of a plate carrier issue. I'm sure with enough autism I can get it secured better.

Loading...
Build Quality
Rated 5 out of 5
Image by Jacob R. View more (3)
Was this helpful?