Police Trade-In MSA Millennium Gas Mask

THIS PRODUCT IS SUBJECT TO ITAR AND OR EAR EXPORT RESTRICTIONS. NO INTERNATIONAL SALES.

BY PURCHASING THIS PRODUCT, YOU AGREE TO THE INCLUDED ITAR STATEMENTS AND WILL ABIDE BY THEM.

The MSA Millennium is a full-face, CBRN approved respirator system. It is MSA's military grade gas mask based on the proven MCU-Series gas masks used by the US Air Force and Navy in 1990s and 2000s. It uses standard NATO 40mm filter canisters.

Designed for military, police and first responder use, the gas mask features a one-piece visor and swappable filter ports which allow the user to fire a rifle cheek-welded from either side of the mask without having the filter get in the way. It also features a selection of accessories that add application flexibility and allow for the accommodation of special user needs.

All masks should be test fit and leak checked before serious use. For testing instructions see the MSA Millennium Manual.

MSA outserts are available here. It is recommended to always have the outsert on when while the mask is in use for the most protection.

For basic cleaning instructions, please see our Gas Mask care guide.

Sizing

While all sizes can fit, the proper size is the one that seals to your face and doesn't squeeze your skin too hard. A size small might fit but that doesn't mean it covers the vital parts or contours of your face to create a proper and safe seal. Size medium seems to be the catch all with small and large being extremes. Gas mask sizing is tricky. The size that fits is "the size that fits."

Specs

• Hycar Rubber® face piece
• Distortion-free coated lens 
• Designed for law enforcement and public safety officials 
• six-point rubber harness 
• Speaking diaphragm (compatible with MSA’s ESP II Communications System and MSA ESP II Voice Amplifier)
• Flexible, one-piece polyurethane protective lens
• Nosecup for fog prevention
• Included hydration inlet tube and port to connect to your canteen or CamelBak
• Canister 40mm inlet ports on left or right side enables operation of a weapon from either side
• NIOSH approval for effectiveness against chloroacetophenone (CN), chlorobenzylidene (CS), and oleoresin capsicum (OC) tear gas
• Exceeds all CBRN permeation requirements

Condition Guide

Factory New

• Mask is new, in original factory packaging.
• Includes Clear Outersert, MSA service tools, and original manuals.

Great

• Visor is clear with little to no scratches or blemishes.
• Does not include outsert.

Good

• Visor will have some scratches or blemishes. May have minor fading.
• Does not include outersert.

Serviceable+

• Visor will have some scratches or blemishes
• Visor will have some UV fading/yellowing 
• Does not include outsert.

Gas Mask Care Guide

To clean your Gas mask:

Gather a rag, bucket, soapy water, cotton balls, and the mask in a clean space. For soap, we highly recommend something ammonia based like Windex or generic glass cleaner. Do not use alcohol, as it dries out rubber.

1. First remove any filters attached. You don’t clean filters, you replace them.
2. Soak your rag in the soapy water and wipe off the large parts of the mask. Rub away dirt, grime, particles and anything else that shouldn’t be there.
3. Next soak the cotton balls in the soapy water and rub the inside of the glass, around the nose piece and anywhere your mouth sets on the rubber. Make sure to get behind the folded edges and everywhere else. Wipe off the buckles and straps too. Leave your gas mask in a cool place out of the sun to dry and you are all set to head back into the zone, the job-site, or whatever unsavory airspace you happen to find yourself in.